The new X-nozzle system now defines a new application standard for the future.
Available beginning November 1, 2018.
Painters now have the choice to choose between two different spray fan shapes – available in “I” and “O”-nozzle types in both HVLP and RP.
“O”-nozzles have an oval-shaped spray fan pattern with a larger dry zone and a wet core to accommodate increased application speed at the expense of slightly less application control during the painting process. The film build per coat in comparison to an “I”-nozzle of the same size is slightly higher.
“I”-nozzles have a parallel spray fan pattern with a minimal dry zone and a dryer center, which is ideal for painters preferring a reduced application speed and maximized application control during the painting process. The film build per coat in comparison to an “O”-nozzle of the same size is slightly reduced.
Depending on the properties of the paint system, the climatic conditions and application technique, each painter can now select a spray gun with the suitable nozzle set for their individual needs. Due to the new design of fluid tip and air cap, the air distribution insert is no longer required. We have reduced the noise level of this whispering nozzle during application, giving painters the feeling of a softer, more comfortable coating process. The X-nozzles considerably reduce paint waste!
www.satausa.com
800-533-8016
[email protected]
